Profemax
Introduction
Profemax system is an ideal column formwork for the sites which use crane in operations . Profemax every type of projects very successfully .
Either the dimensions of walls and columns are changing continuously or they are always the same throughout the project .
it isn’t important for profemax system .
Profemax System is easy and adjustable for both situations . The high resistance of the surrounding profile allows the panels to withstand
the high concrete pressure.
All of those features make profemax system to be economic.
Product Design
System is designed to withstand fresh concrete pressure of 80 kN/m2 . All components are ready to use upon arrival at the site.
Special profiles which form the frame , increase the strength of the panel and ensure along service life.
By means of special shaped profiles and one-blow clamps , panel connection are very easy and quick.
Panel connection are not dependent on the holes on the frame .
The frame surrounds the plywood and protects plywood’s edges from injuries .
A few clamps are enough for a rigid connection .This ensures to shorten the assembly and disassembly period.
The frame prevents the water to get into the plywood through its sides . The surface of the panel is covered by 18 mm plywood.
Profemax Overview
Profemax Panel
It is the main component of the system. The surface of the panel is covered by 18 mm thick film-coated plywood. Special profiles are used to form the frame.
universal panel
Profemax universal panels provide easy solutions at the columns, atthe stop-ends and at the corners.
Tie-rod and wing nut
Tie-rods and wing nuts withstand the fresh concrete pressure on the formwork.
inside corner panel
Whether the angle is obtuse, acute or right there is always convenient inside corner panel.
outside corner panel
One of the outside corner solution is to use outside corner panel.
Profemax Clamp
Profemax clamps connect the panels easily. Only one blow is enough to make a rigid connection. Clamps are not dependent on the holes of
the frame profile. Due to special shape of the frame profiles and the clamps, panels are fixed together at any point around the frame.
• Two panels fixed with one hammer blow.
• Clamps are not dependent on the holes on the frame.
• A few clamps are enough for a rigid connection.
• Clamps straighten panels
